TIPS FOR MAGNETIC SIGNS USERS

Surface Preparation - The magnetic sheet and metal surface should be clean and dry. In outdoor application as vehicle signs, the metal surface should be waxed. Wax should be cured for 2 days before applying magnet.

Application - Magnet holds best to flat surfaces and surfaces reasonably curved in one direction.

When the magnet is placed in the wrong position, remove the magnet and realign. Do not pull the magnet to realign when it is against the surface, as the magnet may stretch due to the resistance caused by the high magnetic strength. Make sure the entire magnet is against the metal surface (no air pockets).

Cleaning - Some moisture and dirt will collect between the magnet and metal surface, particularly in outside applications (vehicle signs). REMOVE and CLEAN both the magnet and surface with a mild detergent and allow both to thoroughly dry. For vehicle signs repeat the cleaning process DAILY.

New clear coat / base coat and vinyl surfaces such as those present on new cars and trucks should be cured before magnets are applied. We recommend curing times of 90 days for paint ant 60 days for clear coats. We do not recommend applying magnetic signs to repainted surfaces.

Storage - The magnet is more pliable and easier to work with if it is near room temperature when applied.

The best way to store the magnetic signs is flat – never magnet to magnet.

We appreciate the trust you have placed in our product. It is our goal to manufacture a quality sign to meet your expectations. We will not be responsible for ANY damage to painted surfaces. Magnetic signs are temporary signage and should be treated as such. We are not responsible for lost magnets. Removal and cleaning are paramount and the sole responsibility of the user. We trust that this product is used and cared for in an appropriate fashion. This manufacturer cannot be held responsible for any damages caused by environmental pollutants and other influences outside of its control.